5 Unusual Ways to Improve Poor Signal Reception

Poor cell phone signal reception is never appreciated. No one likes those missing signal bars on a phone’s display. You might have suffered from this problem some time in your life.

Such problems have always been there and over the years people have come up with some unique, unusual, and home-made remedies for these problems. 5 such ways these crafty individuals say to improve your signal reception are given below.

An old radio antenna

An old radio antenna might be a solution to your poor reception. They say that all you need is an old radio antenna. This might sound absurd, but there are actually testimonials available on YouTube guaranteeing results from the use of this technique. All that you need to do is place a radio antenna close to your cell phone and connect it to your cell phone’s external antenna using a copper wire.

Tesla Coils

It is an electrical resonant transformer circuit that can help you improve your cell phone reception. All that you need is a little piece of tesla coil and tape. You can tie the tape around your cell phone’s antenna and then use the tape to make sure it stays there. (that is if you can actually find the antenna on your phone… )

Paper Clip

This is one of the easiest methods of improving the reception. A paper clip is available in almost all offices. All that you need to do is to take a paper clip and fix it in your phone’s external antenna. Attention must be paid while doing so as paper clips can cause damage to your cell phone’s display or casing. Duct tape can be used to tie the clip with your cell phone. (This is was presented by they guy with tape on his glasses also)

Empty Cans

Now you’ll never throw away those empty cans as they can recue you from your bad signal reception. This is one of the most absurd ways but it actually works like magic. All that you need is two empty cans, a cutter, some copper wire, and a soldering iron.

The Steps

1. Wash the cans properly so that no residue is left.

2. Cut the end of any one can properly all the way, where there is no opening, and then join both the cans together by soldering them.

3. Make one hole in any of off the cans and put in the copper wire inside and make sure it holds well. Now put the other end of the wire into your cell phone’s external antenna, and you are DONE!

These are the simple steps of utilizing empty cans to improve your signal reception. Many variations of the method are available and some even include the option of making little propellers out of the cans for decorations.

Insulated Wire

This is again one of the cheapest methods. All you need is 20cm of insulated wire. Strip both sides of the wire (about 1cm each) and skew around half the wire to a stick in order to give it those circles. Now that your antenna is ready, you need to place it on your cell phone’s external antenna and then you are done.

Enjoy these cheap and easy methods and say good bye to poor signal reception. Or you can truly increase your weak cell signals with proven signal boosters that are very affordable, much more effective and will do a lot less harm to your expensive wireless devices.

Some Unfamiliar Ways to Boost Mobile Signal Strength

A name flashes on the screen of your mobile phone and a smile appears on your face as the caller is someone very dear to you but suddenly you see just a single signal strength bar and all your joy disappears immediately. Has it ever happened to you? If yes, you are in dire need to know the ways which can make your cell phone receive stronger signal strength at your place. Here are some unusual but highly effective methods to boost mobile signal reception.

1) Utilize Tesla Coils and Tape

Take a little piece of Tesla coil, an electrical resonant transformer circuit, and tie it to the external antenna of your phone with the help of some tape. It really helps boosting the signal strength received by your phone. However, this option is feasible only if you can find the external antenna on the phone.

2) Put Paper Clips to Work

Here comes the most hassle-free way to enhance the signal strength received by your cell phone. Paper clips are easily available anywhere. You just have to place it in the external antenna of your phone. But you must be careful while doing that, as improper use of these clips can cause scratches on the screen or body.

3) Pick Your Discarded Radio Antenna

No, we are not cracking a joke here, the trick really works. All you have to do is to take a copper wire and connect your mobile phone’s external antenna to a radio antenna. If you still don’t believe it, you can watch testimonial videos posted on YouTube that guarantee good results from the technique.

4) Take Clue from Tin-Can Telephone

Remember the tin-can telephone you used as a kid? Make it again by soldering two cans and attach it to your phone’s external antenna using some copper wire. It will surely take some time but the results would be amazing. It can increase 2 or 3 signal bars on your phone’s screen.

5) Create an Extra Antenna

Take a piece of insulated wire, ideally 20cm long, and wrap it around a stick to make an antenna of your own. When placed on the mobile phone’s external antenna, it works as an extra antenna and brings in more signal strength to allow uninterrupted, high-quality calling and browsing experience.

6) Never Let Signal Bars Go Below 2

Drained batteries need more power to search for signals. That’s why keeping your phone always charged can be a good way to keep connectivity issues to the minimum. Make sure the battery of your phone is charged at least to 2 bars all the time. Whenever you find it draining beyond that point, start charging it.

I hope you will find these methods to keep battery issues at bay helpful. You can also invest in a good quality mobile signal booster to enjoy sound signal strength in your home, office, or car.